# Restoration of Pravetz-16 Turbo (IBM PC XT compatible)

*2014-10-31*

> Restoring a Pravetz-16 Turbo from a scrap depot, with hardware specifications, photos of the cleanup, and memories of learning Turbo Pascal.

My journey into software development started 20 years ago. It may sound crazy, but I was eight when I was introduced to my first computer and [Turbo Pascal](https://en.wikipedia.org/wiki/Turbo_Pascal).

{{< figure align="aligncenter" width=799 src="/blog/turbo-pascal.gif" alt="Turbo Pascal DOS IDE with the Debug menu open" caption="Turbo Pascal DOS IDE" >}}

My first computer was a Pravetz-16. It was something new and fascinating to me, and I was hooked immediately.

As the years passed and technology advanced, the old Pravetz eventually died and was sent for recycling.

Almost 20 years later, I felt the urge to have my old computer back and started searching. It was a long search, but I eventually found an advert from a scrap depot selling an old Pravetz. I called them and bought it for 100 leva, around US$70 at the time. It was just the system unit, without any peripherals. Before buying it, I asked the seller to try turning it on. They reported that it powered on, so I arranged to have it delivered.

{{< figure align="aligncenter" width=1024 src="/blog/20141029_130735.jpg" alt="Front of the dusty Pravetz-16 before cleaning" caption="The Pravetz before cleaning" >}}

The machine was full of dust, dirt, and dead spiders, and it had a few hardware problems, including an apparently dead serial board. Otherwise, it was largely original. It still had its factory labels, warranty card, and documentation for the floppy drive.

{{< figure align="aligncenter" width=768 src="/blog/20141029_125502-e1414745166593-768x1024.jpg" alt="Original warranty card attached to the inside of the Pravetz case" caption="The original warranty card" >}}

According to the warranty card, the machine was produced on 12 December 1989. It's the Turbo version, with the following specifications:

| Component | Specification |
| --- | --- |
| CPU | NEC V20 (Intel 8088 compatible) |
| RAM | 1 MB |
| Hard drive | 20 MB |
| Floppy drive | 5¼-inch |
| Printer port | LPT |
| Serial port | COM |
| Graphics | CGA video card (VDO-3) |

{{< figure align="aligncenter" width=768 src="/blog/20141029_125520-e1414745952918-768x1024.jpg" alt="Bulgarian documentation for the 5¼-inch floppy drive" caption="The floppy drive documentation" >}}

{{< figure align="aligncenter" width=768 src="/blog/20141029_130904-e1414746134738-768x1024.jpg" alt="Original service contact sticker on the side of the case" caption="The service contact sticker" >}}

{{< figure align="aligncenter" width=1024 src="/blog/20141029_130941-e1414746246511-1024x768.jpg" alt="Pravetz 16/ES 1839 model label on the back of the case" caption="The model label on the back" >}}

{{< figure align="aligncenter" width=1024 src="/blog/20141029_125448.jpg" alt="Inside the Pravetz before cleaning, showing the expansion cards, drives, and power supply" caption="Inside the PC before cleaning" >}}

{{< figure align="aligncenter" width=768 src="/blog/20141029_125529-e1414746513513-768x1024.jpg" alt="Red power switch on the side of the Pravetz case" caption="The power switch" >}}

{{< figure align="aligncenter" width=1024 src="/blog/20141029_132053-1024x768.jpg" alt="Dead spiders and cobwebs around the rear expansion slots" caption="Dead spiders and cobwebs around the rear expansion slots" >}}

It took me seven hours to disassemble the PC, clean it screw by screw, and put it back together. I washed the non-electrical parts and cleaned the electrical components with an alcohol solution and an old toothbrush. The old Pravetz now looks like new.

[![Inside the Pravetz after cleaning and reassembly](/blog/20141029_211651.jpg)](/blog/20141029_211651.jpg)

[![The cleaned Pravetz with its case reassembled](/blog/20141029_211720.jpg)](/blog/20141029_211720.jpg)

I also found a keyboard yesterday and ordered a pile of floppy disks. They should arrive soon.

{{< figure align="aligncenter" width=1024 src="/blog/20141030_152608.jpg" alt="Keyboard with Latin and Cyrillic key legends resting on the Pravetz" caption="The keyboard" >}}

Now I'm looking for a CGA monitor so I can finally turn the machine on and see whether it boots. In the meantime, I'll disassemble and clean the keyboard.

Follow-up: [Diskettes for the Pravetz](/diskettes-for-the-pravetz/).

